• Content Count

  • Joined

  • Last visited

  • Days Won


Turboforslund last won the day on April 1

Turboforslund had the most liked content!

Community Reputation

28 Excellent

About Turboforslund

  • Rank
    Seriously R
  • Birthday 05/11/1981

Profile Information

  • Gender

Previous Fields

  • Location
    Mariefred, Sweden

Recent Profile Visitors

2,380 profile views
  1. Hi, The numbers of the Bosch ECU will tell what bin to use. // Turboforslund
  2. Hi, Will the immo still be intact but with an added logging feature for 609 equipped cars? If so, it's a great step forward! Really great news! // Turboforslund
  3. Excellent digging! That might be it! Wonder if there are any benefits of having the OBD pin 7 going thru the immo? Interesting to see if a direct line to B36 would do it (at least during bootmode active). Hope you find a working solution this weekend! Good luck! // Turboforslund
  4. Hi, Have you read the pages 481-483? It might bring some more knowlege or hints. I have a 850 from 1995 that do not have an OBD port at all. Maybe my own "OBD install" is a little less populated pin-wise than a stock OBD port (I do not know). Will anything like that have an influence for you as it seems to work perfect at the bench? // Turboforslund
  5. Hi, I'm wondering if the common ground between step-up and ECU power is the issue. Have you done exactly as the instruction tells? Any difference in pinout or power supply in between bench and car? Regarding the fan. That should not make a difference if it's on or disconnected but I turned the fan off thru a relay to avoid power consumption and noise. // Turboforslund
  6. Ok, let's hope for the best. A lot of work but it will hopefully be worth all the effort in the end. // Turboforslund
  7. Hi, The turbo will always provide more airflow then what the engine consumes, also at idle. If you measure the direction of air at the dumpvalve hose connection it will blow out. Any measured airflow from the MAF will read more then what really enters the engine. It will be a interesting test! 😎 // Turboforslund
  8. Hi, I belive that the closed loop control will be turned off above that value. 12.24 is the highest possible value and thereby never turned off = always in closed loop regulation. // Turboforslund
  9. Hi, I use the Spartan 2 together with Boch LSU 4.9. I had a look at the logs and I got 12.6kg/h at idle. In the log you can see how the boost pressure is basically inchanged but the maf voltage gets really noisy (and AFR super rich). I checked my WB mod and have the exact same calibration settings as you stated earlier in your post. It is interesting that you use an "open" dumpvalve without a return hose. All the air that is measured by the MAF will not enter the engine and the engine will therby struggle to keep AFR stable. Can you try (as a test) to remove the dumpvale comp
  10. Hi, I haven't tried the WB mod yet. I got it but have not tested it. Have you tried to plug the dumpvalve? How is it connected in terms of air-recirculation? My own issue right now is how to make stable rpm's/afr at idle with my supercharger engaged (magnetic clutch). The extra airflow tends to disturb the MAF a lot... 😎 // Turboforslund
  11. Welcome back Midnight Caller! I wish you the best of luck with the Volvo. GT3071 will be awesome! I run a GTX3076 and is wonderful! // Turboforslund
  12. Hi, Can it be the "TPS Angle for WOT Detection" or "Throttle angle threshold for LDR active" that needs an updated calibration? Have you checked the WG-tention? Do you run with a different throttle housing diameter with the new engine? What does TCV duty cycle, Air Mass, STFT and Injection time tell you if you make a log file? // Turboforslund
  13. Good, I hope you know it is only pin b8 that needs +15V or so to be able to flash. All the other pins can keep the 12V supply. // Turboforslund